QVREC(1)                  Local commands                 QVREC(1)


NAME
       qvrec - upload pictures to a Casio QV-10 digital camera.

SYNOPSIS
       qvrec [ -D ttydevice ] [ -S speed ] [ -hv ] file1.cam
       file2.cam ...

DESCRIPTION
       This manual page applies to qvrec version 0.92 by ken-ichi
       HAYASHI and Jun-ichiro "itojun" ITOH.

       qvrec allows the computer to upload CAM format pictures to
       the Casio QV-10 digital camera.  Use entirely at your  own
       risk.  The CAM format is proprietary to Casio.

       The  camera  can  take  up to 96 pictures, each at 320x240
       24-bit pixels. It can be linked to the serial  port  of  a
       computer  using  the  supplied  cable  (see  qvplay(1) for
       wiring changes needed for some machines).

       If the camera does not respond, switch it off and then  on
       again  to  do  a 'hard' reset.  If the transfer times out,
       try using a slower speed.

       All pictures should be 480x240 pixels.

OPTIONS
       Options are processed from left to right so it  is  impor-
       tant to set the serial line and speed first.

       -D ttydevice
              Specify  the  serial  port  to  use. Something like
              /dev/cua0 on Unix and COM1  on  less  sophisticated
              systems.

       -S speed
              Specify  the  baud  rate for the transfer. Possible
              values are  {normal,  mid,  high,  top,  light}  or
              {1,2,3,4,5}   for  a  corresponding  {9600,  19200,
              38400, 57600, 115200} baud rate.  'light speed'  is
              supported  in  Linux,  OS2,  and  Win  NT/95.  With
              Linux, use setserial(1) to achieve lightspeed  e.g.

                setserial /dev/cua1 spd_hi  # set 57600baud
                qvrec -S top file1.cam
              or
                setserial /dev/cua1 spd_vhi # set 115200baud
                qvrec -S light file2.cam

              If  you  are using a PC/AT compatible computer, you
              will need a 16550A compatible serial controller  to
              use more than 19200 baud (the 'mid' setting).

       -h     Print  a  help  message  and  exit.   Report camera



Local              $Date: 1997/10/08 15:09:20 $                 1





QVREC(1)                  Local commands                 QVREC(1)


              revision (?)

       -v     Verbosely reports  upload  information  on  stderr.
              Reported information is uploaded bytes, not a file-
              size.

ENVIRONMENT
FILES
BUGS
COPYRIGHT
AUTHORS
       Ken-ichi HAYASHI <xg2k-hys@asahi-net.or.jp>

       Jun-ichiro "itojun" Itoh <itojun@csl.sony.co.jp>

AVAILABILITY
       Unix systems:
       -PC/AT clone Linux 1.2.13, 1.3.20
       -PC/AT clone BSD/OS 2.0
       -Sony NEWS-3150U2 NEWS-OS 4.2.1RN
       -Sony NEWS-1860 NEWS-OS 4.2C
       -Sony NEWS-4000 NEWS-OS 6.1.1
       -NEC EWS4800 Rel.4.4 Rev01
       -Sun Sparc Station 20 Solaris2.3(SunOS 5.3)
       -Sparc clone SunOS 4.1.4
       -Apple Macintosh SE/30 NetBSD 1.0
       -PC/AT clone FreeBSD 2.0.5R(*)
       -PC/AT clone FreeBSD 2.1.0R(*)
       -NeXT NeXTcube(M68040-25) NEXTSTEP 3.3J(*)

       Non-Unix systems:
       -SHARP X68030 + Human68k 3.02
       -PC/AT clone Windows NT 3.51(Intel)(work on DOS prompt)
       -PC/AT clone Windows 95(work on DOS prompt)

       Systems marked with (*) need the hardware  hack  described
       under BUGS above.

SEE ALSO
       qvplay(1), qvalldel(1), cam2jpeg(1) by Jun-ichiro "itojun"
       Itoh <itojun@csl.sony.co.jp>.

       camtoppm.pl(1) by Shuji Senda  <senda@kuis.kyoto-u.ac.jp>.














Local              $Date: 1997/10/08 15:09:20 $                 2